Dražice OKC 160 NTR/BP stationary with side flange
Code: 13000703
Article: OKC 160 NTR/BP
In stock: available
Product description
BP design – side flange.
Series of enamelled indirect heaters designed to be placed on the floor with volumes between 100–300 litres with enamelled vessel and one or two (beginning from the 200 l types) high performance heat exchangers for heating of hot water from external sources or combination of different sources.
By connecting of both heat exchangers in series a user may get hot water source with the output up to 57 kW.
The heater is equipped with hot water temperature regulation system (thermostat controlling the three-way valve or circulation pump) for the voltage 230 V/50 Hz and up to volumes 200 l with a safety valve and circulation outlet.
In the lower part of the heater is a flange manhole used to clean the inside of the vessel and eventual insertion of the auxilliary electric heating of the TPK series as an accessory.
Technical data
| Model | OKC 160 NTR/BP | |
|---|---|---|
| Volume | 155 | l |
| Vessel operating pressure | 0,6 | MPa |
| Electric protection category | 44 | IP |
| Weight | 82 | kg |
| Heater height | 1018 | mm |
| Heater diameter | 584 | mm |
| Heating water operating pressure | 1 | MPa |
| Bottom exchanger heating surface | 1,45 | m² |
| Heating rate from 10 °C to 60 °C (by exchanger) | 23 | min. |
| Electrical heating rate from 10 °C to 60 °C (2,2 kW) | 4,5 | h |
| Continuous hot water output BE ./TE. | 990 | l/hod |
| Bottom/top exchanger (BE/TE) output | 32 | kW |
| Heating water max. temperature | 110 | °C |
| Hot water max. temperature | 80 | °C |
| Heat loss | 1,39 | kWh/24 h |